View R0E572167CFK10E_4787416.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

REJ10J2025-0100
SH7216 Group PLQP0176KB-A User System Interface Converter Board
R0E572167CFK10 User's Manual Renesas Microcomputer Development Environment System SuperHTM Family / SH7216 Series R0E572167CFK10E
Rev.1.00 Revision Date: Jul. 03, 2009
Rev. 1.00 Jul. 03, 2009 Page ii of xviii REJ10J2025-0100
Notes regarding these materials
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries.
Rev. 1.00 Jul. 03, 2009 Page iii of xviii REJ10J2025-0100
Rev. 1.00 Jul. 03, 2009 Page iv of xviii REJ10J2025-0100
IMPORTANT INFORMATION
READ FIRST
* READ this user's manual before using this emulator product. * KEEP the user's manual handy for future reference. Do not attempt to use the emulator product until you fully understand its mechanism. Emulator Product: Throughout this document, the term "emulator product" shall be defined as the following products produced only by Renesas Technology Corp. and Renesas Solutions Corp. excluding all subsidiary products. * * * * * * * * E200F main unit External bus trace unit Evaluation-chip unit Profiling expansion unit Emulation memory unit Common user-system interface adaptor cable User-system interface converter board Trace cable
The user system or a host computer is not included in this definition. Purpose of the User System Interface Converter Board: The user system interface converter board is used to connect the evaluation chip unit to the user system. This user system interface converter board must only be used for the above purpose. Limited Applications: This emulator product is not authorized for use in transportation, vehicular, medical (where human life is potentially at stake), aerospace, nuclear, or undersea repeater applications. Buyers of this emulator product must notify Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product distributor before planning to use the product in such applications. Improvement Policy: Renesas Technology Corp. (including its subsidiaries, hereafter collectively referred to as Renesas) pursues a policy of continuing improvement in design, performance, and safety of the emulator product. Renesas reserves the right to change, wholly or partially, the specifications, design, user's manual, and other documentation at any time without notice.
Rev. 1.00 Jul. 03, 2009 Page v of xviii REJ10J2025-0100
Target User of the Emulator Product: This emulator product should only be used by those who have carefully read and thoroughly understood the information and restrictions contained in the user's manual. Do not attempt to use the emulator product until you fully understand its mechanism. It is highly recommended that first-time users be instructed by users that are well versed in the operation of the emulator product. Users are required to be familiar with the basic knowledge for the electric circuits, logic circuits, and microcomputers. Precautions to be Taken when Using This Product: 1. This emulator is a development supporting unit for use in your program development and evaluation stages. In mass-producing your program you have finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing integration test, evaluation, or some experiment else. 2. In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this emulator. 3. Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge. However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any circumstances. 4. This emulator has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when used in Japan. 5. This emulator does not conform to safety standards such as UL or IEC. Be careful when you take this emulator overseas. 6. Renesas cannot anticipate every possible circumstance that might involve a potential hazard. The warnings in this user's manual and on the emulator product are therefore not all inclusive. Therefore, you must use the emulator product safely at your own risk.
Rev. 1.00 Jul. 03, 2009 Page vi of xviii REJ10J2025-0100
LIMITED WARRANTY
Renesas warrants its emulator products to be manufactured in accordance with published specifications and free from defects in material and/or workmanship. Renesas, at its option, will replace any emulator products returned intact to the factory, transportation charges prepaid, which Renesas, upon inspection, shall determine to be defective in material and/or workmanship. The foregoing shall constitute the sole remedy for any breach of Renesas' warranty. See the Renesas warranty booklet for details on the warranty period. This warranty extends only to you, the original Purchaser. It is not transferable to anyone who subsequently purchases the emulator product from you. Renesas is not liable for any claim made by a third party or made by you for a third party.
DISCLAIMER
RENESAS MAKES NO WARRANTIES, EITHER EXPRESS OR IMPLIED, ORAL OR WRITTEN, EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR USE, OR AGAINST INFRINGEMENT OF ANY PATENT. IN NO EVENT SHALL RENESAS BE LIABLE FOR ANY DIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE EMULATOR PRODUCT, THE USE OF ANY EMULATOR PRODUCT, OR ITS DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. EXCEPT AS EXPRESSLY STATED OTHERWISE IN THIS WARRANTY, THIS EMULATOR PRODUCT IS SOLD "AS IS ", AND YOU MUST ASSUME ALL RISK FOR THE USE AND RESULTS OBTAINED FROM THE EMULATOR PRODUCT.
Rev. 1.00 Jul. 03, 2009 Page vii of xviii REJ10J2025-0100
State Law: Some states do not allow the exclusion or limitation of implied warranties or liability for incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may have other rights which may vary from state to state. The Warranty is Void in the Following Cases: Renesas shall have no liability or legal responsibility for any problems caused by misuse, abuse, misapplication, neglect, improper handling, installation, repair or modifications of the emulator product without Renesas' prior written consent or any problems caused by the user system. All Rights Reserved: 1. Circuitry and other examples described herein are meant merely to indicate the characteristics and performance of Renesas' semiconductor products. Renesas assumes no responsibility for any intellectual property claims or other problems that may result from applications based on the examples described herein. 2. No license is granted by implication or otherwise under any patents or other rights of any third party or Renesas. 3. This user's manual and emulator product are copyrighted and all rights are reserved by Renesas. No part of this user's manual, all or part, may be reproduced or duplicated in any form, in hard-copy or machine-readable form, by any means available without Renesas' prior written consent. Figures: Some figures in this user's manual may show items different from your actual system.
Rev. 1.00 Jul. 03, 2009 Page viii of xviii REJ10J2025-0100
SAFETY PAGE
READ FIRST
* READ this user's manual before using this emulator product. * KEEP the user's manual handy for future reference. Do not attempt to use the emulator product until you fully understand its mechanism.
DEFINITION OF SIGNAL WORDS
Either in the user's manual or on the product, several icons are used to insure proper handling of this product and also to prevent injuries to you or other persons, or damage to your properties. Their graphic images and meanings are given in this safety page. Be sure to read this chapter before using the product.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
DANGER
DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.
WARNING
CAUTION CAUTION
NOTE emphasizes essential information.
In addition to the four above, the following are also used as appropriate.
Rev. 1.00 Jul. 03, 2009 Page ix of xviii REJ10J2025-0100
means WARNING or CAUTION.
Example:
CAUTION AGAINST AN ELECTRIC SHOCK
means PROHIBITION.
Example:
DISASSEMBLY PROHIBITED
means A FORCIBLE ACTION.
Example:
UNPLUG THE POWER CABLE FROM THE RECEPTACLE.
Rev. 1.00 Jul. 03, 2009 Page x of xviii REJ10J2025-0100
WARNING
Warnings for AC Power Supply: the attached AC power cable does not fit the receptacle, do not alter the AC power cable and do not plug it forcibly. Failure to comply may cause electric shock and/or fire.
* Use * Do * If
an AC power cable which complies with the safety standard of the country. not touch the plug of the AC power cable when your hands are wet. This may cause electric shock.
* This
product is connected signal ground with frame ground. If your developing product is transformless (not having isolation transformer of AC power), this may cause electric shock. Also, this may give an unrepairable damage to this product and your developing one. While developing, connect AC power of the product to commercial power through isolation transformer in order to avoid these dangers.
* If
other equipment is connected to the same branch circuit care should be taken not to overload the circuit. Refer to nameplate for electrical ratings. When installing this equipment, insure that a reliable ground connection is maintained.
*
Rev. 1.00 Jul. 03, 2009 Page xi of xviii REJ10J2025-0100
WARNING
you smell a strange odor, hear an unusual sound, or see smoke coming from this product, then disconnect power immediately by unplugging the AC power cable from the outlet. Do not use this as it is because of the danger of electric shock and/or fire. In this case, contact your local distributor.
* When * If
installing or connecting this product with other equipment, shut down AC power or disconnect the AC power cord from the equipment to prevent personal injury or damage to the equipment.
Warnings to Be Taken for This Product:
*
Do not disassemble or modify this product. Personal injury due to electric shock may occur if this product is disassembled and modified. Make sure nothing falls into the cooling fan on the top panel, especially liquids, metal objects, or anything combustible.
*
Warning for Installation: Do not set this product in water or areas of high humidity. Make sure that the product does not get wet. Spilling water or some other liquid into the product may cause unrepairable damage. Warning for Use Environment: This equipment is to be used in an environment with a maximum ambient temperature of 35C. Care should be taken that this temperature is not exceeded.
* *
Rev. 1.00 Jul. 03, 2009 Page xii of xviii REJ10J2025-0100
CAUTION
Cautions for AC Adapter: Use only the AC adapter included in this product package.
* * *
The included AC adapter is for this emulator. Do not use it for other product. The DC plug on the included AC adapter has the below polarity.
*
The included AC adapter has no power supply switch. The AC adapter is always active while connecting the AC power cable. Check if the power is supplied by the LED of AC adapter. Cautions to Be Taken for This Product:
*
Use caution when handling this product. Be careful not to apply a mechanical shock.
*
Do not pull the main unit by the probe of the emulation probe or the flexible cable which are connected to this product. Excessive flexing or force of the flexible cable for connecting this product to the emulation probe may break connector. Caution for Installation:
*
When in use do not place the emulator on its side.
Rev. 1.00 Jul. 03, 2009 Page xiii of xviii REJ10J2025-0100
WARNING
Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY. The USER PROGRAM will be LOST. 1. Do not repair or remodel the emulator product by yourself for electric shock prevention and quality assurance. 2. Always switch the E200F emulator and user system OFF before connecting or disconnecting any CABLES or PARTS. 3. Always before connecting any CABLES, make sure that the pin 1 positions on both sides are correctly aligned.
Rev. 1.00 Jul. 03, 2009 Page xiv of xviii REJ10J2025-0100
Preface
The R0E572167CFK10 is a user system interface converter board that connects a user system for the SH7216 in the PLQP0176KB-A package (Former package code: FP-176EV) to the SH7216 E200F emulator (R0E0200F1EMU00 or R0E572160VKK00).
Rev. 1.00 Jul. 03, 2009 Page xv of xviii REJ10J2025-0100
Rev. 1.00 Jul. 03, 2009 Page xvi of xviii REJ10J2025-0100
Contents
Section 1 Configuration .........................................................................................1 Section 2 Environmental Conditions .....................................................................5 Section 3 Connection Procedures ..........................................................................7
3.1 Connecting User System Interface Board to User System.................................................... 7 3.1.1 Installing the IC Socket......................................................................................... 7 3.1.2 Assembling the IC Socket..................................................................................... 8 Connection to the User System When the Flexible Cable is in Use ................................... 10 3.2.1 Assembling the User System Interface Cable ..................................................... 10 3.2.2 Connecting User System Interface Board to EV-Chip Unit ............................... 13 3.2.3 Installing to the IC Socket................................................................................... 15 Connection to the User System When the Flexible Cable is Not in Use ............................ 16 3.3.1 Mounting on the IC Socket ................................................................................. 16 3.3.2 Connecting the Common User-System Interface Adaptor Cable (Board Section) ................................................................................................... 17 3.3.3 Adjusting the Spacer Position ............................................................................. 18 3.3.4 Connecting the User System Interface Board to EV-Chip Unit.......................... 19 Dimensions ......................................................................................................................... 21 3.4.1 Recommended Dimensions for User System Mount Pad (Footprint)................. 21 3.4.2 External Dimensions........................................................................................... 22 3.4.3 Dimensions of User System Interface Converter Board when Connected ......... 23
3.2
3.3
3.4
Section 4 Installing the MCU to the User System ...............................................27 Section 5 Verifying Operation .............................................................................29 Section 6 Notice...................................................................................................31
Rev. 1.00 Jul. 03, 2009 Page xvii of xviii REJ10J2025-0100
Rev. 1.00 Jul. 03, 2009 Page xviii of xviii REJ10J2025-0100
Section 1 Configuration
Section 1 Configuration
Figure 1 and table 1 show the external appearance and components, respectively, of the user system interface converter board for the PLQP0176KB-A. Please make sure you have all of these components when you unpack the product.
EV-chip unit
Common user-system interface adaptor cable (board section)
x3 Screws (M2.0 x 6 mm) The cover that encloses the QFP
Common user-system interface adaptor cable (flexible cable sections)
User-system interface converter board
MCU
Screws for ICE connection Joint connector for ICE
IC socket
User system
Figure 1 Appearance of the User-System Interface Converter Board for SH7216 Group Products in the PLQP0176KB-A Package
Rev. 1.00 Jul. 03, 2009 Page 1 of 32 REJ10J2025-0100
Section 1 Configuration
CAUTION
Use the following items with the IC socket for the PLQP0176KB-A package on the user system: On the user system, use an NQPACK176SD-ND IC socket and HQPACK176SD and cover that encloses the QFP (both manufactured by Tokyo Eletech Corporation), and a YQPACK176SD joint connector for ICE and YQGUIDE-S1 screws for ICE connection (also both manufactured by Tokyo Eletech). To connect the emulator with the user-system interface converter board for the PLQP0176KB-A, the common adaptor cable (R0E200F1CKL11) for the interface board must be obtained separately.
Rev. 1.00 Jul. 03, 2009 Page 2 of 32 REJ10J2025-0100
Section 1 Configuration
Table 1
R0E572167CFK10 Components
Quantity 1 Remarks R0E572167CFK10
No. Component 1 User-system interface PLQP0176KB-A converter board IC socket
2
1
NQPACK176SD-ND PLQP0176KB-A package (mounted on the user system) Phillips-head screwdriver x 1, Guide pin x 3
3
The cover that encloses the QFP
1
HQPACK176SD PLQP0176KB-A package (mounted on the user system) Screws (M2.0 x 6mm) x 4
4
Joint connector for ICE
1
YQPACK176SD PLQP0176KB-A package (mounted on the user system) Screws (M2.0 x 10mm) x 4 (not used with this product)
5 6 7
Screws for ICE connection Standard screwdriver User's manual
1 1 1
YQGUIDE-S1 (a set of four) For YQGUIDE-S1 User's manual for R0E572167CFK10 (this manual)
Rev. 1.00 Jul. 03, 2009 Page 3 of 32 REJ10J2025-0100
Section 1 Configuration
Rev. 1.00 Jul. 03, 2009 Page 4 of 32 REJ10J2025-0100
Section 2 Environmental Conditions
Section 2 Environmental Conditions
Maintain the conditions in table 2 when using the emulator. Table 2
Item Temperature Humidity Vibration
Environmental Conditions
Specifications Operating: +10 to +35C Storage: -10 to +35C Operating: 35 to 80% RH, no condensation Storage: 35 to 80% RH, no condensation Operating: 2.45 m/s max. 2 Storage: 4.9 m/s max. 2 Transportation: 14.7 m/s max. There must be no corrosive gases present.
2
Ambient gases
Rev. 1.00 Jul. 03, 2009 Page 5 of 32 REJ10J2025-0100
Section 2 Environmental Conditions
Rev. 1.00 Jul. 03, 2009 Page 6 of 32 REJ10J2025-0100
Section 3 Connection Procedures
Section 3 Connection Procedures
3.1 Connecting User System Interface Board to User System
WARNING
Always switch OFF the user system and the emulator product before the USER-SYSTEM INTERFACE CONVERTER BOARD is connected to or removed from any part. Before connecting, make sure that pin 1 on both sides are correctly aligned. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY. The USER PROGRAM will be LOST.
3.1.1 Installing the IC Socket
Solder the IC socket (NQPACK176SD-ND) for PLQP0176KB-A package to the user system.
CAUTION
Before soldering, use an epoxy-resin adheisive to affix the guide section on the bottom surface of the IC socket to the user system. Ensure that the leads are soldered so that the solder wets the leads and forms solder fillets on their edges (use slightly more solder than usual).
After checking the position of pin 1, insert the joint connector for ICE (YQPACK176SD) to IC socket (NQPACK176SD-ND) for PLQP0176KB-A package on the user system.
CAUTION
Only connect the parts after checking that the positions of pin 1 match.
Rev. 1.00 Jul. 03, 2009 Page 7 of 32 REJ10J2025-0100
Section 3 Connection Procedures
3.1.2
Assembling the IC Socket
CAUTION
1. 2. Use a standard screwdriver whose head matches the screw head. The tightening torque must be 0.054 Nom or less. If the applied torque cannot be accurately measured, stop tightening when the force required to turn the screw becomes significantly greater than that needed when first tightening. If a screw is tightened too much, the screw head may break or an IC socket contact error may be caused by a crack in the IC socket solder. If the emulator does not operate correctly, cracks might have occurred in the solder. Check conduction with a tester and re-solder the IC socket if necessary.
3.
Use the four screws for ICE connection (YQGUIDE-S1) to affix the cover for ICE connection (YQPACK176SD) to the IC socket (NQPACK176SD-ND) for the PLQP0176KB-A package on the user system. When securing the screws, tighten each a little at a time, alternating between the screws in opposing corners. Take special care, such as manually holding the soldered portion of the IC socket in place, to prevent the application of twisting force by overtightening the screws etc.
Rev. 1.00 Jul. 03, 2009 Page 8 of 32 REJ10J2025-0100
Section 3 Connection Procedures
Screws for ICE connection (YQGUIDE-S1 manufactured by Tokyo Eletech Corporation)
Pin 1
Joint connector for ICE (YQPACK176SD manufactured by Tokyo Eletech Corporation) IC socket (NQPACK176SD-ND manufactured by Tokyo Eletech Corporation)
User system
Figure 2 Connecting User System Interface Board to User System
Rev. 1.00 Jul. 03, 2009 Page 9 of 32 REJ10J2025-0100
Section 3 Connection Procedures
3.2
Connection to the User System When the Flexible Cable is in Use
The IC socket on the user system is connected with the emulator in either of two ways according to whether or not the flexible cable section of the common cable for the user system interface is in use. Refer to this section (section 3.2, Connection with the Flexible Cable) or section 3.3, Connection without the Flexible Cable according to whether or not the flexible cable is in use. While the flexible cable leads to longer delay times for generated signals to reach the device from the IC socket, the area taken up on the emulator board for the user system is smaller. This form of connection is thus applicable to a wider variety of layouts for the user system. Refer to point 3 of section 5 for details on the delay time. 3.2.1 Assembling the User System Interface Cable
CAUTION
Check the location of pin 1 and the connector number before insertion.
* Connecting the user system interface cable Use the flexible cable section of the common cable for the user system interface to connect the board section of the common cable for the user system interface with the user-system interface converter board (see figure 3).
Rev. 1.00 Jul. 03, 2009 Page 10 of 32 REJ10J2025-0100
Section 3 Connection Procedures
Connect the flexible cable to CONNECTOR1 mounted on the board section of the common user-system interface adaptor cable as shown below.
After that, connect the flexible cable to CONNECTOR2.
Connect the flexible cable to CONNECTOR3.
Connect the common user-system interface adaptor cable with the user-system interface PLQP0176KB-A converter board,with each of the three flexible cable sections of the adaptor cable connected to the corresponding connector ([CONNECTOR1], [CONNECTOR2], or [CONNECTOR3]) on the converter board.
Figure 3 Assembling the User System Interface Cable
Rev. 1.00 Jul. 03, 2009 Page 11 of 32 REJ10J2025-0100
Section 3 Connection Procedures
When removing the flexible cable from a converter board or a board section of the adaptor cable, keep the board in place, hold both sides of the connector at the head of the cable, and apply vertical force to pull the cable away. If the join is stiff so that the cable is dificult to remove, pull the cable head up from the right or left side. Do not apply pressure in the direction marked "X", since this will damage the connector.
Figure 4 Removing the Flexible Cable
Rev. 1.00 Jul. 03, 2009 Page 12 of 32 REJ10J2025-0100
__ _ __ __ _
Section 3 Connection Procedures
3.2.2
Connecting User System Interface Board to EV-Chip Unit
WARNING
Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY. The USER PROGRAM will be LOST. 1. Always switch OFF the user system and the emulator product before connecting the COMMON USER-SYSTEM INTERFACE ADAPTOR CABLE to or removing it from any part. Before connecting the cable, make sure that the pin 1 positions on both sides are correctly aligned. 2. Use the common user-system interface adaptor cable that is specifically for the emulator.
1. Make sure the user system and emulator are turned off. 2. Align the connectors on the board with those on the EV-chip unit according to their numbers (figure 5).
Rev. 1.00 Jul. 03, 2009 Page 13 of 32 REJ10J2025-0100
Section 3 Connection Procedures
EV-chip unit Connector number EV-chip unit connector number
User I/F connector 1 (CN4) User I/F connector 2 (CN5)
Conector number on the user-system interface adaptor cable
UCN1 UCN2
Common user-system interface adaptor cable (board section)
Figure 5 Connecting the User System Interface Board to the EV-Chip Unit
Rev. 1.00 Jul. 03, 2009 Page 14 of 32 REJ10J2025-0100
Section 3 Connection Procedures
3.2.3
Installing to the IC Socket
Connect and fasten the user system interface converter board to the joint connector for ICE (YQPACK176SD) for a PLQP0176KB-A package on the user system. Apply vertical force to fasten the parts together. Take particular care to align the positions of pin 1 and the guide pin and to avoid the application of twisting force that might damage the soldered joint connector for ICE.
Pin 1
User-system interface converter board
Joint connector for ICE (YQPACK176SD manufactured by Tokyo Eletech Corporation)
User system
Figure 6 Connecting the User System and User System Interface Board
Rev. 1.00 Jul. 03, 2009 Page 15 of 32 REJ10J2025-0100
Section 3 Connection Procedures
3.3
Connection to the User System When the Flexible Cable is Not in Use
While the connection takes up a larger area on the emulator board for the user system when the flexible cable is not in use, delay times for generated signals to reach the device from the IC socket are shorter. This form of connection is thus applicable when the cable connection is leading to insufficient timing margins. Refer to point 3 of section 5, Verifying Operation, for details on the delay time.
3.3.1
Mounting on the IC Socket
Connect and fasten the user system interface converter board to the joint connector for ICE (YQPACK176SD) for a PLQP0176KB-A package on the user system. Apply vertical force to fasten the parts together. Take particular care to align the positions of pin 1 and the guide pin and to avoid the application of twisting force that might damage the soldered joint connector for ICE.
Pin 1
User-system interface converter board
Joint connector for ICE (YQPACK176SD manufactured by Tokyo Eletech Corporation)
User system
Figure 7 Connecting the User System and User System Interface Board
Rev. 1.00 Jul. 03, 2009 Page 16 of 32 REJ10J2025-0100
Section 3 Connection Procedures
3.3.2
Connecting the Common User-System Interface Adaptor Cable (Board Section)
CAUTION
Check the position of pin 1 and the connector number before insertion.
Ensure that the positions of [CONNECTOR1], [CONNECTOR2], or [CONNECTOR3] on the common user-system interface adaptor cable match the positions of [CONNECTOR1], [CONNECTOR2], or [CONNECTOR3] on the user-system interface converter board, and connect the cable to the board. When they are correctly connected, the six guide pins on the user-system interface converter board will enter the holes on the board section of the common user-system interface adaptor cable.
Spacer
Common user-system interface adaptor cable (board section)
Guide pin Common user-system interface converter board
User system
Figure 8 Connecting the Common User-System Interface Adaptor Cable (Board Section)
Rev. 1.00 Jul. 03, 2009 Page 17 of 32 REJ10J2025-0100
Section 3 Connection Procedures
3.3.3
Adjusting the Spacer Position
Adjust the positions of the spacers mounted on the four corners of the common user- system interface adaptor board so that they are in contact with the user system.
Common user-syetem interface adaptor cable (board section)
Spacer
Spacer
User system
Figure 9 Adjusting the Spacer Position
Rev. 1.00 Jul. 03, 2009 Page 18 of 32 REJ10J2025-0100
Section 3 Connection Procedures
3.3.4
Connecting the User System Interface Board to EV-Chip Unit
WARNING
Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY. The USER PROGRAM will be LOST. 1. Always switch OFF the user system and the emulator product before connecting the COMMON USER-SYSTEM INTERFACE ADAPTOR CABLE to or removing it from any part. Before connecting the cable, make sure that the pin 1 positions on both sides are correctly aligned. 2. Use the common user-system interface adaptor cable that is specifically for the emulator.
1. Make sure the user system and emulator are turned off. 2. Align the connectors on the board with those on the EV-chip unit according to their numbers (figure 10).
Rev. 1.00 Jul. 03, 2009 Page 19 of 32 REJ10J2025-0100
Section 3 Connection Procedures
Ev-chip unit Connector number Ev-chip unit connector number
User I/F Connector 1 (CN4) User I/F Connector 2 (CN5) Connector number on the user-system interface adaptor cable UCN1 UCN2
Common user-system interface adaptor cable (board section)
Figure 10 Connecting the User System Interface Board to the EV-Chip Unit
Rev. 1.00 Jul. 03, 2009 Page 20 of 32 REJ10J2025-0100
Section 3 Connection Procedures
3.4
3.4.1
Dimensions
Recommended Dimensions for User System Mount Pad (Footprint)
Figure 11 shows the recommended dimensions for the mount pad (footprint) for the user system with an IC socket for a PLQP0176KB-A package (NQPACK176SD-ND): manufactured by Tokyo Eletech Corporation).
27.10 min 23.10 max 0.50 x 43 = 21.50 0.30 0.50 0.05 0.25 0.05
Pin 1
10.0 0.2
0.5 0.05
Guide hole
Dimensions and tolerance Dimensions Tolerance
2.00 0.10
to 1.2 1.3 to 2.0 2.1 to 5.0 5.1 to 10.0 10.1 to
0.05 0.10 0.15 0.20 0.30
Unit: mm
Figure 11 Recommended Dimensions for Mount Pad
Rev. 1.00 Jul. 03, 2009 Page 21 of 32 REJ10J2025-0100
0.50 x 43 = 21.5 0.30
10.0 0.2
Section 3 Connection Procedures
3.4.2
External Dimensions
The external dimensions of the EV-chip unit, common user-system interface adaptor cable, and user-system interface converter board are shown in figure 12.
125.0 125.0
90.0
External bus trace unit
125.0
90.0
Emulation memory unit
60.0 49.0
110.0
20.0
90.0
EV-chip unit
Common user-system interface adaptor cable (board section)
267.0 241.0
35.0
Common user-system interface adaptor cable (flexible cable sections)
53.0
35.0
90.0
User-system interfcae converter board
Unit: mm Tolerance: 0.5 mm
Figure 12 External Dimensions of the External Bus Trace Unit, Emulation Memory Unit, EV-Chip Unit, Common User-System Interface Adaptor Cables, and the Converter Board
Rev. 1.00 Jul. 03, 2009 Page 22 of 32 REJ10J2025-0100
5.81
Section 3 Connection Procedures
3.4.3
Dimensions of User System Interface Converter Board when Connected
Dimensions of the user system interface converter board when it is connected to the user system are shown in figure 13, figure 14, figure 15, and figure 16.
IC socket (NQPACK176SD-ND manufactured by Tokyo Eletech Corporation) 9.5 33.0 10.5
35.0
53.0
33.0
Pin 1
17.8
Joint connector for ICE (YQPACK176SD manufactured by Tokyo Eletech Corporation)
26.0
Tolerance: 0.5 mm
Unit: mm
Figure 13 Dimensions of the User-System Interface Converter Board when Connected to the User System (Connection Includes the Flexible Cable)
Rev. 1.00 Jul. 03, 2009 Page 23 of 32 REJ10J2025-0100
Section 3 Connection Procedures
External bus trace unit EV-chip unit Emulation memory unit
78.5
22.6
17.8
26.0 37.5
Spacer ( 6.0)
27.0 26.0 27.5
35.1
User system IC socket (NQPACK176SD-ND manufactured by Tokyo Eletech Corporation)
34.0
28.5
20.5
39.19
39.19
User system
Pin 1
Top view
Unit: mm Tolerance: 1.0 mm
Figure 14 Dimensions of the User System and Connected User-System Interface Converter Board (with the External Bus Trace Unit, Emulation Memory Unit, and EV-chip Unit also Connected)
Rev. 1.00 Jul. 03, 2009 Page 24 of 32 REJ10J2025-0100
61.0
Section 3 Connection Procedures
EV-chip unit
External bus trace unit
65.5
22.6
17.8
26.0 37.5
Spacer ( 6.0)
27.0 26.0 27.5
35.1
User system IC socket (NQPACK176SD-ND manufactured by Tokyo Eletech Corporation)
34.0
28.5
20.5
39.19
39.19
User system
Pin 1
Unit: mm Tolerance: 1.0 mm Top view
Figure 15 Dimensions of the User System and Connected User-System Interface Converter Board (with the External Bus Trace Unit and EV-chip Unit also Connected)
Rev. 1.00 Jul. 03, 2009 Page 25 of 32 REJ10J2025-0100
48.0
Section 3 Connection Procedures
EV-chip unit
52.6
22.6
17.8
26.0 37.5 34.0
27.0 26.0 27.5
35.1
User system IC socket (NQPACK176SD-ND manufactured by Tokyo Eletech Corporation)
Spacer ( 6.0)
28.5
20.5
39.19
39.19
User system
Pin 1
Unit: mm Tolerance: 1.0 mm Top view
Figure 16 Dimensions of the User System and Connected User-System Interface Converter Board (with the EV-chip Unit also Connected)
Rev. 1.00 Jul. 03, 2009 Page 26 of 32 REJ10J2025-0100
Section 4 Installing the MCU to the User System
Section 4 Installing the MCU to the User System
CAUTION
1. Check the location of pin 1 before inserting. 2. Use a Phillips-head screwdriver whose head matches the screw head. 3. The tightening torque must be 0.054 Nom or less. If the applied torque cannot be accurately measured, stop tightening when the force required to turn the screw becomes significantly greater than that needed when first tightening. If a screw is tightened too much, the screw head may break or an IC socket contact error may be caused by a crack in the IC socket solder. 4. If the MCU does not operate correctly, cracks might have occurred in the solder. Check conduction with a tester and re-solder the IC socket if necessary.
Check the location of pin 1 before inserting the MCU into the IC socket (NQPACK176SD-ND) on the user system, as shown in figure 17. After inserting the MCU, use the four provided screws (M2.0 x 6 mm) to fasten the top cover for the IC package (HQPACK176SD). Take special care, such as manually holding the soldered portion of the IC socket in place, to prevent the application of twisting force by overtightening the screws etc.
Rev. 1.00 Jul. 03, 2009 Page 27 of 32 REJ10J2025-0100
Section 4 Installing the MCU to the User System
Screws M2.0 x 6 mm
The cover that enclose the QFP (HQPACK176SD manufactured by Tokyo Eletech Corporation)
MCU (SH7216)
Pin 1
IC socket (NQPACK176SD-ND manufactured by Tokyo Eletech Corporation)
User system
Figure 17 Installing MCU to User System
Rev. 1.00 Jul. 03, 2009 Page 28 of 32 REJ10J2025-0100
Section 5 Verifying Operation
Section 5 Verifying Operation
1. Turn on the emulator according to the procedures described in the SH7216 E200F Emulator User's Manual (R0E0200F1EMU00J or R0E572160EMU00J). 2. The emulator connected to this user-system interface converter board supports two kinds of clock sources as the MCU clock. For details, refer to the SH7216 E200F Emulator User's Manual (R0E0200F1EMU00J). To use the emulator internal clock Select the [Emulator Internal Clock] in the [Select Emulation] dialog displayed when connecting to the emulator. To use the external clock on the user system Select the [User System Clock] in the [Select Emulation] dialog displayed when connecting to the emulator. Supply the external clock from the user system to the emulator by inputting the EXTAL pin (pin 121) on the user-system interface converter board or connecting the crystal oscillator to the XTAL (pin 119) and EXTAL pins. For details, refer to section 4, Clock Pulse Generator, in the SH7216 Group Hardware Manual. Figure 18 shows the clock oscillator on the user system interface board.
1 M HCU04 HCU04 HCU04
HCU04
22
To E200F emulator
HCU04 270
HCU04
EXTAL
XTAL
System clock
Figure 18 Clock Oscillator
Rev. 1.00 Jul. 03, 2009 Page 29 of 32 REJ10J2025-0100
Section 5 Verifying Operation
3.
When connecting the E200F emulator and the user system with the common user-system interface adaptor cable and the user system converter board, the wiring of the circuit between the IC socket pins and pins of the devices on the user system leads to delay times for the signals.
When the connection includes the flexible cable Table 3 gives the delay times when the common user-system interface cable is used with the supplied flexible cable. Table 3
No. 1 2 3
Delay Times Created by Connection with the Flexible Cable
Signal Name _RES NMI Other signals Delay Time (ns) 22 19 6
When the connection does not include the flexible cable Table 4 shows the delay time generated when the supplied flexible cable has been removed from the common user-system interface adaptor cable. Table 4
No. 1 2 3
Delay Times Created by Connection without the Flexible Cable
Signal Name _RES NMI Other signals Delay Time (ns) 19 16 3
Rev. 1.00 Jul. 03, 2009 Page 30 of 32 REJ10J2025-0100
Section 6 Notice
Section 6 Notice
1. Before connecting any parts or cables, make sure that pin 1 on the both sides are correctly aligned. 2. Do not apply excessive force to the user-system interface converter board while it is connected to the user system. 3. The dimensions of the recommended mount pad for the IC socket for this user-system interface converter board are different from those of the MCU. 4. This user-system interface converter board is specifically designed for the SH7216 E200F EV-chip unit (R0E572160VKK00). Do not use this board with any other emulator. 5. When power is not supplied to the VCCQ pin on the user-system interface converter board, the emulator displays ** VCC DOWN. The emulator will not operate correctly.
Rev. 1.00 Jul. 03, 2009 Page 31 of 32 REJ10J2025-0100
Section 6 Notice
Rev. 1.00 Jul. 03, 2009 Page 32 of 32 REJ10J2025-0100
SH7216 Group PLQP0176KB-A User System Interface Board User's Manual
Publication Date: Rev.1.00, July 3, 2009 Published by: Sales Strategic Planning Div. Renesas Technology Corp. Edited by: Customer Support Department Global Strategic Communication Div. Renesas Solutions Corp.
(c) 2009. Renesas Technology Corp., All rights reserved. Printed in Japan.
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2377-3473 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
http://www.renesas.com
Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510
Colophon 6.2
SH7216 Group PLQP0176KB-A User System Interface Board User's Manual

▲Up To Search▲

Price & Availability of R0E572167CFK10E

	To Download R0E572167CFK10E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .